Kérjük, válasszon kiszállítási helyet

Az ország/régió kiválasztása befolyásolhatja az árat, a szállítási lehetőségeket és a termékválasztékot.
Kapcsolattartóm
igus® Hungária Kft.

Ipari Park utca 10.

H-1044 Budapest

+36 1 3066486
+36 1 4310374

Guide rollers

A rendelési csúcsok miatt az egyes tételek szállítási ideje 10-15 munkanappal hosszabb a megadottnál. Kérjük, nézze meg megrendelésünk visszaigazolását a konkrét szállítási dátumról.Sürgos, rövid távú igények esetén kérjük, lépjen kapcsolatba velünk személyesen, hogy megvalósíthassuk az Ön számára szükséges szállítási idot. Kapcsolattartóját a menü tetején, a "Saját kapcsolattartó személy" alatt, a nyelv / ország kiválasztása után találja meg, vagy itt.

Termékek száma: 12

iglidur® H1, guide roller, L-slot, 90°, mm

  • Endurance runner with high media resistance
  • High wear resistance in extreme ambient conditions
  • Very low coefficient of friction
  • High resistance to temperature and chemicals
den 3,42 EUR/Pc.
9 árucikk, ebből szállításra kész:
9 4 hét múlva indítható
Tovább a termék oldalára
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H1, guide roller, V-slot, 60°, mm

  • Endurance runner with high media resistance
  • High wear resistance in extreme ambient conditions
  • Very low coefficient of friction
  • High resistance to temperature and chemicals
den 3,42 EUR/Pc.
9 árucikk, ebből szállításra kész:
9 4 hét múlva indítható
Tovább a termék oldalára
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H1, guide roller, U-slot, mm

  • Endurance runner with high media resistance
  • High wear resistance in extreme ambient conditions
  • Very low coefficient of friction
  • High resistance to temperature and chemicals
kérésre
5 árucikk, ebből szállításra kész:
3 4 hét múlva indítható
Tovább a termék oldalára
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P210, guide roller, L-slot, 90°, mm

  • Specialist for pivoting, rolling applications and more - good coefficient of friction and wear on almost every shaft
  • Low moisture absorption
  • Extremely wear-resistant, especially with loads of up to 20MPa in pivoting applications
  • Versatile: good performance on many different shafts
  • Good with edge loads
  • Lubrication-free and maintenance-free
  • Standard range from stock
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A350, guide roller, L-slot, 90°, mm

  • The endurance runner at higher temperatures in the food sector
  • Complies with Regulation (EU) No. 10
  • FDA compliant
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +180°C
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, guide roller, L-slot, 90°, mm

  • The FDA-compliant all-rounder
  • The iglidur® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, guide roller, U-slot, mm

  • The FDA-compliant all-rounder
  • The iglidur® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A350, guide roller, U-slot, mm

  • The endurance runner at higher temperatures in the food sector
  • Complies with Regulation (EU) No. 10
  • FDA compliant
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +180°C
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P210, guide roller, U-slot, mm

  • Specialist for pivoting, rolling applications and more - good coefficient of friction and wear on almost every shaft
  • Low moisture absorption
  • Extremely wear-resistant, especially with loads of up to 20MPa in pivoting applications
  • Versatile: good performance on many different shafts
  • Good with edge loads
  • Lubrication-free and maintenance-free
  • Standard range from stock
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, guide roller, V-slot, 60°, mm

  • The FDA-compliant all-rounder
  • The iglidur® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A350, guide roller, V-slot, 60°, mm

  • The endurance runner at higher temperatures in the food sector
  • Complies with Regulation (EU) No. 10
  • FDA compliant
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +180°C
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P210, guide roller, V-slot, 60°, mm

  • Specialist for pivoting, rolling applications and more - good coefficient of friction and wear on almost every shaft
  • Low moisture absorption
  • Extremely wear-resistant, especially with loads of up to 20MPa in pivoting applications
  • Versatile: good performance on many different shafts
  • Good with edge loads
  • Lubrication-free and maintenance-free
  • Standard range from stock
RoHS compliant
According to 2011/65/EU (RoHS 2)

Konzultáció

We would be happy to answer your questions personally

Szállítás és tanácsadás

Személyesen:

Hétfotol péntekig reggel 7 és este 8 között.
Szombaton reggel 8 és 12 között.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.