Kérjük, válasszon kiszállítási helyet

Az ország/régió kiválasztása befolyásolhatja az árat, a szállítási lehetőségeket és a termékválasztékot.
Kapcsolattartóm
igus® Hungária Kft.

Ipari Park utca 10.

H-1044 Budapest

+36 1 3066486
+36 1 4310374

Guide rings

Guide rings replace PTFE tapes with only one clip-on guide ring, e.g. in lifting elements, control valves and fittings. As a standard product range made of iglidur® J material, and also available as freely configurable products made of iglidur® J and further materials.

Kategóriák
Szurés
Alapveto követelmények
Size
Requirements

A rendelési csúcsok miatt az egyes tételek szállítási ideje 10-15 munkanappal hosszabb a megadottnál. Kérjük, nézze meg megrendelésünk visszaigazolását a konkrét szállítási dátumról.Sürgos, rövid távú igények esetén kérjük, lépjen kapcsolatba velünk személyesen, hogy megvalósíthassuk az Ön számára szükséges szállítási idot. Kapcsolattartóját a menü tetején, a "Saját kapcsolattartó személy" alatt, a nyelv / ország kiválasztása után találja meg, vagy itt.

Termékek száma: 16

iglidur® J, guide ring

  • Very good wear resistance at roomtemperature
  • Very good wear resistance at medium high temperatures
  • Extremely good coefficient of friction
  • Low humidity absorption
  • High media resistance
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Resistant to dirt and dust
  • Mold resistant acc. to DIN EN ISO 846
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J3 guide ring

  • Very good wear resistance at roomtemperature
  • Very good wear resistance at medium high temperatures
  • Extremely good coefficient of friction
  • Low humidity absorption
  • Good wear resistance under water
  • High media resistance
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Resistant to dirt and dust
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J350, guide ring

  • Good wear resistance at roomtemperature
  • Very good wear resistance at medium high temperatures
  • Good wear resistance at high temperatures
  • Very good coefficient of friction
  • Very low humidity absorption
  • Good wear resistance under water
  • High media resistance
  • Resistant to high loads (>60 N/mm²)
  • Mold resistant acc. to DIN EN ISO 846
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® X guide ring

  • Very good wear resistance at high temperatures
  • Suitable for extremely high speeds
  • Very low humidity absorption
  • Very good wear resistance under water
  • Very high media resistance
  • Resistant to high loads (>60 N/mm²)
  • Electrically conductive
  • Mold resistant acc. to DIN EN ISO 846
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® Z guide ring

  • Extremely long service life under extreme conditions, resistant to wear and impact even at high loads and temperatures
  • Excellent wear resistance especially with high loads
  • High thermal resistance
  • For extreme loads
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P210 guide ring

  • Good wear resistance at roomtemperature
  • Good wear resistance at medium high temperatures
  • Extremely good coefficient of friction
  • Low humidity absorption
  • Very resistant to edge pressures
  • Very resistant to impacts/shock
  • Resistant to dirt and dust
  • Fogging behavior acc. to DIN 75201-B
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® W300 guide ring

  • Good wear resistance at roomtemperature
  • Extremely good coefficient of friction
  • Low humidity absorption
  • High media resistance
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Resistant to dirt and dust
  • Resistant to high loads (>60 N/mm²)
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H1 guide ring

  • Very good wear resistance at roomtemperature
  • Very good wear resistance at medium high temperatures
  • Very good wear resistance at high temperatures
  • Suitable for very high speeds
  • Very good coefficient of friction
  • Very low humidity absorption
  • Good wear resistance under water
  • Very high media resistance
  • Resistant to high loads (>60 N/mm²)
  • Mold resistant acc. to DIN EN ISO 846
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A181 guide rings

  • Good wear resistance at roomtemperature
  • Suitable for high speeds
  • Low humidity absorption
  • High media resistance
  • Very resistant to edge pressures
  • Very resistant to impacts/shock
  • Resistant to dirt and dust
  • FDA-compliant
  • EU 10/2011-compliant
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® G guide ring

  • Very good coefficient of friction
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Very resistant to dirt and dust
  • Resistant to high loads (>60 N/mm²)
  • Mold resistant acc. to DIN EN ISO 846
  • Fogging behavior acc. to DIN 75201-B
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A500 guide ring

  • Easy to install
  • cost-effective
  • More wear-resistant than PTFE-strips
  • Higher load capacity
  • Defined variables
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® Q2 guide ring

  • Suitable for high speeds
  • Very resistant to edge pressures
  • Very resistant to impacts/shock
  • Very resistant to dirt and dust
  • Resistant to high loads (>60 N/mm²)
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® M250 guide ring

  • Very resistant to edge pressures
  • Very resistant to impacts/shock
  • Very resistant to dirt and dust
  • Fogging behavior acc. to DIN 75201-B
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P guide ring

  • Very good coefficient of friction
  • Low humidity absorption
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Resistant to dirt and dust
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H370 guide ring

  • Good wear resistance at high temperatures
  • Suitable for very high speeds
  • Very good coefficient of friction
  • Very low humidity absorption
  • Very good wear resistance under water
  • Very high media resistance
  • Resistant to high loads (>60 N/mm²)
  • Electrically conductive
RoHS compliant
According to 2011/65/EU (RoHS 2)

Konzultáció

We would be happy to answer your questions personally

Szállítás és tanácsadás

Személyesen:

Hétfotol péntekig reggel 7 és este 8 között.
Szombaton reggel 8 és 12 között.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.