Kérjük, válasszon kiszállítási helyet

Az ország/régió kiválasztása befolyásolhatja az árat, a szállítási lehetőségeket és a termékválasztékot.
Minden hely megtekintése
Tovább: www.igus.com
24 órán belül indítható Élettartam számítás CAD Direct Letöltés
myigus
Bevásárlókosár
(0)
Kapcsolattartóm
igus® Hungária Kft.- iroda

Ipari Park utca 10.

H-1044 Budapest

+36 1 3066486
+36 1 4310374
Üzenet küldése
Összes kapcsolattartó megjelenítése
HU(HU)
Menü
  1. Nyitólap
  2. Csuklócsapágyak
  3. Önbeálló, rápattintható csapágy
  4. Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Housing material: igumid G 
  • Material of spherical ball: iglidur® J4V
  • Maintenance-free dry operation
  • Easy installation
  • Max. tolerance compensation ±0.2 mm

Nem biztos abban, hogy megfelelo-e az adott árucikk?

Expert system
Free sample request
Product description
igubal® spherical bearings
 
The use of spherical bearings is usually associated with heavy bearing materials, difficult installation and high costs. Most of the time, maintenance is still necessary in the long term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.
 
The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.
 
Here, the spherical ball is made from iglidur® J4 material, which is known for its low costs and low coefficient of friction during dry operation. The special shape of the spherical ball pre-loads suitable shafts completely when they are in an unloaded state, ensuring that it is completely clearance-free.
  • Maintenance-free dry operation
  • Easy assembly

Typical application areas
  • Food industry
  • Railway technology
  • Automotive industry
  • Plant construction
     
    You can find many further application areas here Industry solutions
 
When to use it?
  • For high axial and radial loads
  • When easy installation is required
  • In case of reduced installation space
  • If chemical resistance is required
  • If a cost-effective option is required
  • If you need dirt-resistant bearings
  • To adjust misalignments
When not to use it?
  • If temperatures are higher than +80°C
  • If diameters above 30mm are required
  • When rotation speeds higher than 0.5m/s are required
Use our filter options to find the suitable product

 
Tolerances
maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be included between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Check the inner diameter
 

Assembly
Due to the tolerance compensation, no exactly toleranced housing is required. Please refer to the technical data for the respective maximum and minimum dimensions of the housing hole. In order to achieve the axial loads specified there, the bearing should be additionally secured axially.
 
Muszaki adatok
Letöltések

Egyéb megoldások

Clip bearing, heavy duty, ECLM-HD, igubal®
Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

den 4,98 EUR/Pc.
Spherical bearing, KGLI, inch, igubal®
Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

den 2,22 EUR/Pc.
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

den 5,12 EUR/Pc.
Pillow block bearing, ESTM, J4V, igubal®
Pillow block bearing, ESTM, J4V, igubal®

Simple assembly, two mounting holes, dimensional series E

den 3,22 EUR/Pc.
Spherical insert bearing, JEM, narrow, mm, igubal®
Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

den 17,89 EUR/Pc.
Spherical ball, cost-effective, RKM, mm, igubal®
Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

den 1,96 EUR/Pc.
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

den 12,19 EUR/Pc.
Spherical ball for underwater applications, UWEM, mm, igubal®
Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

den 1,40 EUR/Pc.
Spherical ball, clearance-free, J4VEM, mm, igubal®
Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

den 1,60 EUR/Pc.
Spherical insert bearing, A350EM, narrow, mm, igubal®
Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

den 22,25 EUR/Pc.
Spherical ball, WEI, inch, igubal®
Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

den 1,95 EUR/Pc.
Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

den 1,43 EUR/Pc.
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

den 3,55 EUR/Pc.
Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

den 4,22 EUR/Pc.
In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

den 2,25 EUR/Pc.
In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

den 1,55 EUR/Pc.
Adapter screw, PKRM, igubal®
Adapter screw, PKRM, igubal®

Right-hand thread

den 5,64 EUR/Pc.
Clevis joint with pin and circlip, GELMK, igubal®
Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

den 2,39 EUR/Pc.
Clevis joint with spring-loaded fixing clip, GELMF, igubal®
Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

den 2,48 EUR/Pc.
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

den 6,29 EUR/Pc.
igubal® pillow block bearing, KSTM
igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

den 3,87 EUR/Pc.
Pillow block bearing, ESTM, W300, igubal®
Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

den 3,20 EUR/Pc.
Pillow block bearing, ESTM-GT-GT, igubal®
Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

den 6,07 EUR/Pc.
igubal® AD-01-ESTM adapter for pillow block bearings
igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

kérésre
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

den 23,63 EUR/Pc.
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

den 8,58 EUR/Pc.
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

den 9,42 EUR/Pc.
Spherical bearing, EGLM, igubal®
Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

den 3,97 EUR/Pc.
Spherical thrust bearing, SAM, igubal®
Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

den 2,73 EUR/Pc.
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

den 5,41 EUR/Pc.
Spherical bearing, low cost, KGLM LC, J4, igubal®
Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

den 2,71 EUR/Pc.
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

den 4,81 EUR/Pc.
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

den 9,26 EUR/Pc.
Double joint, EGZM, J4VEM, igubal®
Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

kérésre
Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

den 4,22 EUR/Pc.
Variable coupling joint, WDGM, with ball studs, igubal®
Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

den 6,60 EUR/m
Variable double joint, KDGM, R, igubal®
Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

den 11,03 EUR/Pc.
Variable double joint, KDGM, EK, igubal®
Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

den 16,17 EUR/Pc.
Clevis joint, GERI, igubal®
Clevis joint, GERI, igubal®

Right-hand thread

den 2,12 EUR/Pc.
Spherical bearing, slim line, KGLI SL, igubal®
Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

den 2,32 EUR/Pc.
Clevis joint with pin and circlip, GERIK, igubal®
Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

den 2,39 EUR/Pc.
Split pillow block bearing for square profiles, ESQM, igubal®
Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

den 73,58 EUR/Pc.
Clip bearing with galvanised steel ball studs, igubal®
Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

den 3,00 EUR/Pc.
Ball stud made of tribo-plastic with male thread, GZRM, igubal®
Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

den 0,51 EUR/Pc.
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

den 3,91 EUR/Pc.
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

den 32,60 EUR/m

Konzultáció

Photo
Illy Dániel

+36 70 635 1862
E-mail írása

Szállítás és tanácsadás

Személyesen:

Hétfotol péntekig reggel 7 és este 8 között.
Szombaton reggel 8 és 12 között.

Online:

24h

Az "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" and "yes" kifejezések az igus® GmbH/ Köln jogilag védett védjegyei a Német Szövetségi Köztársaságban és adott esetben egyes külföldi országokban. Ez a védjegyek nem teljes listája (pl. függőben lévő védjegybejelentések vagy bejegyzett védjegyek) az igus vagy az igus leányvállalatai Németországban, az Európai Unióban, az Egyesült Államokban és/vagy más országokban vagy joghatóságokon.

Az igus® GmbH felhívja a figyelmet, hogy a következő cégek, illetve az összes többi, hajtásokat gyártó és a webhelyen szereplő cég semmilyen termékét nem értékesíti: Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber. Az igus® által kínált termékek gyártója az igus® GmbH.