Kérjük, válasszon kiszállítási helyet

Az ország/régió kiválasztása befolyásolhatja az árat, a szállítási lehetőségeket és a termékválasztékot.
Kapcsolattartóm
igus® Hungária Kft.- iroda

Ipari Park utca 10.

H-1044 Budapest

+36 1 3066486
+36 1 4310374
HU(HU)

Delta robots

Termékek száma: 7

3-axis Delta robot | Working diameter 360 mm

Product information
  • Up to 60 picks/min.
  • For loads up to 5 kg
  • For precision requirements of 0.5 mm
  • At speeds up to max. 3.0 m/s
  • Max. acceleration: 60 m/s²

Optionally available
den 3 732,62 EUR/Pc.
10 árucikk, ebből szállításra kész:
10 típus 2-3 hét múlva indítható
Tovább a termék oldalára

2-axis delta robot | Workspace 400 mm

Product information
  • Up to 100 picks/min.
  • Load capacity 5 kg 
  • For precision requirements of 0.5 mm
  • At speeds up to max. 3.0 m/s
  • Max. acceleration: 60 m/s²

Optionally available
den 3 290,24 EUR/Pc.
4 árucikk, ebből szállításra kész:
4 típus 2-3 hét múlva indítható
Tovább a termék oldalára

3-axis Delta robot | Working diameter 660mm

Product information
  • Up to 30 picks/min. 
  • For loads up to 5 kg
  • For precision requirements of 0.5 mm
  • At speeds up to max. 1.0 m/s
  • Max. acceleration: 20 m/s²

Optionally available
den 4 603,57 EUR/Pc.
10 árucikk, ebből szállításra kész:
10 típus 2-3 hét múlva indítható
Tovább a termék oldalára

2-axis delta robot | Workspace 700 mm

Product information
  • Up to 50 picks/min.
  • Load capacity 5 kg
  • For precision requirements of 0.5 mm
  • At speeds up to max. 2.0 m/s
  • Max. acceleration: 30 m/s²

Optionally available
den 3 870,87 EUR/Pc.
4 árucikk, ebből szállításra kész:
4 típus 2-3 hét múlva indítható
Tovább a termék oldalára

Delta robot | Calibration pin

Product information
  • Practical tool for calibration
  • for easy positioning at the zero point
  • Suitable for delta robots
den 4,15 EUR/Pc.
1 árucikk, ebből szállításra kész:
1 típus 24-48 órán belül indítható
Tovább a termék oldalára

Delta robot | Cable clip

Product information
  • Safe cable guidance
  • Lightweight
  • Easy to fit
  • Suitable for 2-axis & 3-axis delta robots
den 2,96 EUR/Pc.
1 árucikk, ebből szállításra kész:
1 típus 24-48 órán belül indítható
Tovább a termék oldalára

Pneumatic rotary feed-through with suction lifter

Product information
  • Stroke: 17 mm
  • Payload: 300 g
  • 360° infinitely rotatable
  • Non-rotating
  • Max. 500 rpm
den 617,18 EUR/Pc.
1 árucikk, ebből szállításra kész:
1 típus 48-72 órán belül indítható
Tovább a termék oldalára

Konzultáció

We would be happy to answer your questions personally

Photo
Karasz Krisztián

Termék menedzser

E-mail írása

Szállítás és tanácsadás

Személyesen:

Hétfotol péntekig reggel 7 és este 8 között.
Szombaton reggel 8 és 12 között.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.